In Situ Detection of Particle Aggregation on Electrode Surfaces

Partially blocked electrodes (PBEs) are important; many applications use non‐conductive nanoparticles (NPs) to introduce new electrode functionalities. As aggregation is a problem in NP immobilization, developing an in situ method to detect aggregation is vital to characterise such modified electrodes. We present chronoamperometry as a method for detection of NP surface aggregation and semi‐quantitative sizing of the formed aggregates, based on the diffusion limited current measured at PBEs as compared with the values calculated numerically for different blocking feature sizes. In contrast to voltammetry, no approximations on electrode kinetics are needed, making chronoamperometry a more general and reliable method. Sizing is shown for two modification methods. Upon drop casting, significant aggregation is observed, while it is minimized in electrophoretic NP deposition. The aggregate sizes determined are in semi‐quantitative agreement with ex situ microscopic analysis of the PBEs.     

非线性半定规划的逐次线性化柔性惩罚法

针对非线性不等式约束半定规划问题提出一种新的逐次线性化方法, 新算法既不要求罚函数单调下降, 也不使用过滤技巧, 尝试步的接受准则仅仅依赖于目标函数和约束违反度, 罚函数中对应于成功迭代点的罚因子不需要单调增加. 新算法或者要求违反约束度量有足够改善, 或者在约束违反度的一个合理范围内要求目标函数值充分下降, 在通常假设条件下, 分析了新算法的适定性及全局收敛性. 最后, 给出了非线性半定规划问题的数值试验结果, 结果表明了新算法的有效性.     

Construction and application of carbon nanotube/polypyrrole-based bacterial surface imprinted sensorEI北大核心CSCD

A simple and fast "non-hole" bacteria surface imprinted (SPBIP) impedance sensor was constructed for ultrasensitive detection of Salmonella. The SPBIP sensor was prepared by one step electropolymerization of pyrrole (functional monomer), single-walled carbon nanotube (SWNT, nano-modulator), and Salmonella(template) onto a glassy carbon electrode. After removing the bacterial template, "non-hole" imprinted sites were formed on the surface of the polymer matrix, allowing the target bacteria to be specifically recognized. The resulting changes in the electrode surface impedance could be used to detect the target bacteria. The effects of the amount of SWNT, polymerization cycles, eluents, elution time and recognition time on the recognition ability of the sensor were investigated. Under the optimal conditions, the sensor could be used to detect 10~1×107 CFU/mLSalmonella with the limit of detection of 3.5 CFU/mL. The sensor could be used for the detection of salmonella in drinking water and orange juice samples with the recoveries ranging from 95.4% to 109.5%. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Co-detection of Copper and Lead in Artisanal Sugarcane Spirit Using Caffeic Acid-modified Graphite Electrodes

Caffeic acid (CA)-modified graphite electrodes [GE/poly(CA)] was applied to the co-detection of copper and lead in artisanal sugarcane spirit using square-wave anodic stripping voltammetry (SWASV). Electrochemical and morphological studies were performed, and a mechanism for polymerization was proposed. Electropolymerization, SWASV, and analysis conditions parameters were optimized. Interferents, repeatability, reproducibility, and addition and recovery tests were carried out. GE/poly(CA) shows a linear range from 15 to 705 μg/L with a limit of detection of 3.01 μg/L for Pb(II) and 4.50 μg/L for Cu(II). Real samples of artisanal sugarcane spirit were used, and the electrochemical results were compared with atomic absorption spectroscopy experiments.     

Sensitive Electrochemical Quantification of Proanthocyanidins in Grapevine (Vitis vinifera) by Utilizing Disposable Screen-printed Carbon Electrodes

This work presents quantification of proanthocyanidins (PAs) isolated from grapevine using disposable screen-printed carbon electrodes (SPCE). Procyanidin B2 (B2) used as a model to investigate the electrochemical characteristics of complicated PAs structures in Britton Robinson buffer solution using cyclic voltammetry and square wave voltammetry. B2 exhibits a well-defined reversible redox wave at +0.49 V vs. Ag/AgCl. Significantly, the B2 was determined over a linear concentration range of 3.45–34.6 μM with a detection limit of 2.07 μM. The SPCE was used to analyze PAs in grapevine samples, and the results were consistent with those obtained using Folin-Ciocalteu standard method.     

Praseodymium Doped Dysprosium Oxide-carbon Nanofibers Based Voltammetric Platform for the Simultaneous Determination of Sunset Yellow and Tartrazine

A platform based on praseodymium doped dysprosium oxide-carbon nanofibers modified electrode was constructed for the simultaneous determination of SY and TAR. SEM, EDX and XRD techniques were utilized for characterizing the proposed material. The voltammetric behaviour and properties of SY and TAR were gradually improved at materials in order from CNFs to Dy₂O₃−CNFs and Pr₆O₁₁@Dy₂O₃−CNFs. The working range was found to be 1.0×10⁻⁹–3.5×10⁻⁸ M and 1.5×10⁻⁹–4.0×10⁻⁸ M for SY and TAR, respectively. The value of LOD was 3.12×10⁻¹⁰ M and 5.35×10⁻¹⁰ M for SY and TAR, respectively. The platform (Pr₆O₁₁@Dy₂O₃−CNFs/GCE) was successfully applied to the electroanalysis of samples.     

Effect of non-covalent interactions in 2,5-di-Me-pyrazine-di-N-oxide - methanol – Carbon nanotube electrocatalytic system

Catalytic oxidation of methanol (MeOH) in the absence of noble metals and noble metal oxides as catalysts, and the use of metal-free materials are inexpensive and attractive process for practical use in electrocatalysis, sensors, and in direct methanol fuel cells. In previous works, it was found that the use of single-walled (SWCNT) or multi-walled (MWCNT) carbon nanotube paper electrodes instead of GC increases the catalytic efficiency of organic compounds oxidation in the presence of aromatic di-N-oxides by several times. In this work, the effect of non-covalent interactions on the catalytic efficiency of MeOH oxidation in the presence of 2,5-di-Me-pyrazine-di-N-oxide (Pyr₁) in 0.1 M Bu₄NClO₄ solution in acetonitrile at SWCNT and MWСNT paper electrodes was studied by the methods of quantum chemical modeling, Raman spectroscopy, and using electrochemical data. New factors determined the features of mechanism of MeOH oxidation on CNT electrodes and lead to an increase in the catalytic efficiency of the electrode process in comparison with the GC electrode were established.     

BC/CoNi2S4@PPy柔性复合电极材料的制备及电化学性能

本文采用溶剂热、原位聚合和真空抽滤相结合的方法制备了用于超级电容器的细菌纤维素/镍钴硫化物/聚吡咯(BC/CoNi₂S₄@PPy)柔性电极材料,通过X射线衍射、场发射扫描电镜、红外光谱、氮气吸脱附、拉伸强度和接触角表征了材料的形貌结构、组成、机械性能和亲水性,并采用循环伏安法和恒电流充放电测试了复合材料的电化学性能。结果表明,表面含氧官能团丰富的BC纤维网络结构对氧化还原活性物质CoNi₂S₄的生长和导电聚合物PPy的分布具有引导作用,CoNi₂S₄均匀分布在BC网络中,且PPy均匀包覆在BC纤维和CoNi₂S₄纳米球表面构成具有丰富孔隙结构的三维导电网络,使得该复合材料具有较好的机械性(抗拉强度达28.0±0.1 MPa)、亲水性(对6 mol·L^-1 KOH的瞬间接触角为43.6°)及良好的导电性。该电极材料在1 A·g^-1下比电容高达2670 F·g^-1,充放电循环10000次后比电容的保持率为82.73%,且经1000次反复弯曲后电化学性能保持不变。此外,将其与活性炭组成的非对称超级电容器,在1 A·g^-1下比电容为1428 F·g^-1,最高能量密度和功率密度分别达49.8 Wh·kg^-1和741.8 W·kg^-1。     

A Novel Carbon Nitride Nanosheets-based Electrochemical Sensor for Determination of Hydroxychloroquine in Pharmaceutical Formulation and Synthetic Urine Samples

This study introduces modified carbon paste electrodes with carbon nitride nanosheets (CNNS) and outlines their application for the determination of hydroxychloroquine sulfate (HCQ) in tablets and synthetic urine samples. CNNS were synthesized by hydrothermal route (200 °C, 10 h) using melamine and citric acid as their precursors. The carbon nitride nanosheets-based electrode (CNNS/E) presented a linear dynamic range for HCQ (LDR), ranging from 10.0 nmol l⁻¹ to 6.92 μmol l⁻¹, and detection (LOD) and quantification limits (LOQ) of 0.16 nmol l⁻¹ and 0.52 nmol l⁻¹, respectively. LOD and LOQ were calculated by the equations: LOD=3(S_d/b), and LOQ=10(S_d/b). The modified sensor presented excellent relative standard deviations for parameters such as repeatability (2.39 % and 1.87 %) and reproducibility (3.22 % and 2.32 %) in HCQ oxidation peaks (1 and 2). The CNNS/E has not shown significant variations in its anodic signal intensity in the presence of some organic and inorganic substances. It is worth bearing in mind that CNNS/E can be easily manufactured and the sensor has the lowest HCQ detection limits reported so far. The proposed sensor was successfully applied for HCQ determination in tablets and synthetic urine, showing good recovery values and an error of 0.60 % about comparative method in tablet samples, assuring the quality of the method.     

Analytical Modelling of Electron-coupled Ion Transfers with Immobilized vs Soluble Redox Transducer at Thick Film-modified Electrodes

Analytical theoretical solutions are deduced for the current-potential response, concentration profiles and interfacial potentials of electron-coupled ion transfers in the cyclic voltammetry with thick film-modified electrodes. The theory covers a wide variety of possible situations, namely, the redox transducer can be either immobilized on the working electrode or freely diffusing in the organic film, and the ion transfer can be either simple or complicated by homogeneous chemical processes. A comparative and comprehensive study of each case is performed, establishing the key parameters that define the behaviour of the system, as well as guidelines to analyse its electrochemical signal.